Services in Barnet
Foundation repair in Barnet: the main options
A crack in a wall or a floor that has dropped can mean several different things. Each problem has its own method of repair, and the right one depends on what is happening beneath the ground around your home.

Finding out what the movement means
A crack in plaster or brickwork does not always mean the ground is moving. Seasonal changes cause materials to expand and contract, and older homes settle over decades. But when a crack widens, steps appear between bricks, or doors begin to stick, something deeper may be shifting.
The first step is establishing whether the movement is active or historic. A specialist surveyor examines the pattern, width and location of the cracks. They look at the soil type, nearby trees and the age of the building. If the signs point to subsidence, they will recommend monitoring over several months before any repair begins.
Rushing into work without understanding the cause risks spending money on a fix that does not address the real problem. The survey sets out what is happening and what needs to happen next. You can read more about how specialists assess suspected subsidence and who to call first.
Underpinning to stabilise foundations
When the ground beneath a home can no longer support its weight, the foundations need extending to reach stable soil. Underpinning involves excavating sections below the existing footing and pouring new concrete in controlled stages. The specialist works in short bays so the walls above remain supported throughout.
This method suits homes where the clay has shrunk permanently or where the original footings were never deep enough. It is heavy work. Soil leaves the site in skips, and the process takes weeks rather than days. Rooms directly above the excavation may need to be emptied while the specialist operates below them.
Different underpinning methods suit different depths and soil conditions. Mass concrete fill is common for shallow extensions, while piled solutions reach much deeper. A structural engineer decides which approach fits the ground conditions around your home. The depth required and the disruption involved depend entirely on what lies beneath the surface.
Resin injection as a less invasive option
Not every subsidence problem requires digging beneath the foundations. Resin injection offers a way to stabilise loose or weakened ground without removing large volumes of soil. A specialist drills small holes through the floor slab or alongside the footing and pumps expanding resin into the voids below.
The resin fills gaps, compacts soft material and can lift a sunken section back toward its original level. Because the equipment is compact, this method works well in tight spaces where traditional underpinning machinery cannot fit. Gardens, driveways and narrow side returns are common locations for resin treatment.
The work causes far less disruption than excavation. There are no skips, no trenches and usually no need to empty rooms. But resin injection is not suitable for every situation. If the clay is still actively shrinking because of a tree root, filling the gap with resin will not stop the movement. A specialist determines whether the ground conditions allow this approach.
Repairing cracked concrete floors and slabs
Concrete floors crack for reasons that have nothing to do with the walls moving. A garage slab may split because it was poured too thin. A screed inside a hallway might crack as it dries out unevenly. These problems look alarming but often sit independently from the structure holding up the roof.
Where subsidence has caused a concrete floor to drop or tilt, the repair must follow the stabilisation of the foundations. Fixing the slab before the ground stops moving means the new concrete will simply crack again. Once the movement has ceased, a specialist can lift, relay or reinforce the damaged section.
Garage floors and external slabs face additional wear from vehicles and weather, so the repair method accounts for the load the surface must bear. Interior screeds require a smoother finish ready for flooring. The type of concrete, the size of the crack and the room it sits in all shape how the specialist approaches the repair.
Screw piling for deep clay and restricted access
Some parts of Barnet sit on clay that shrinks deeply during dry summers. When the unstable layer extends several metres down, standard underpinning may not reach firm ground. Screw piles offer a solution by boring steel shafts deep into the earth until they find a stratum that does not move with the seasons.
The installation uses smaller plant than traditional piling rigs. This matters in terraced streets or homes with narrow side passages where large machinery cannot enter. A specialist drives each pile using hydraulic torque, measuring resistance to confirm it has reached adequate depth.
Once the piles are in place, a reinforced concrete beam transfers the load of the wall above onto the steel shafts. The original footing then rests on stable support rather than shrinking clay. Screw piling suits extensions built on made ground, homes near brook valleys and older properties where the existing foundations were never designed for the soil conditions now affecting them.
Describe what you have noticed in your home
Send details of the cracks or movement you have seen. A specialist will review the information and advise on the next step. This does not commit you to any work or cost.
- No obligation to proceed
- Specialist reviews your details
- Advice on what to do next
Services
- Subsidence help
Advice on suspected subsidence, from the signs worth checking to what a survey involves and which trade or insurer is usually approached first.
- Underpinning
Underpinning in Barnet covers mass concrete, mini piles and screw piles, how long each takes, what access is needed and how much of the house is affected.
- Resin injection
Resin injection for subsidence fills weak ground under footings without deep digging. See how it compares with underpinning and when it suits a home.
- Concrete cracking
Cracked concrete floor repair covers slabs, screeds and hardstanding: what the crack pattern suggests, when ground movement below matters and who to ask.
- Screw piling
Screw piling in Barnet suits deep shrinkable clay, restricted rear access and a settling extension. How the piles work and what the work involves.